Type of equipment
Stenjek for home / desktop AP
Number of radios
3+1 BLE
Number of antennas
4 single-band Wi-Fi + 1 dual-band scan + 1 single-band BLE/ZigBee 2.4GHz
Antenna type and maximum gain
Antenna on the printed circuit board
Dual-band
4.0 dBi in the 2.4GHz band and 4.0 dBi in the 5 GHz band
3.5dBi BLE antenna in the 2.4GHz band
Frequency bands (GHz)
2,400–2,4835, 5,150–5,250, 5,250–5,350, 5,470–5,725, 5,725–5,850
Radio 1 Features
2.4GHz frequency range
Channel width
20/40 MHz
Modulation
BPSK, QPSK, 64/256/1024 QAM
MIMO Chains
2x2 Service
Radio 2 Features
Frequency range 5.0 GHz
Channel width
20/40/80 MHz
Modulation
BPSK, QPSK, 64/256/1024 QAM
MIMO Chains
2x2 Service
Radio 3 Features
The frequency bands are 2.4GHz and 5.0 GHz. Chains
MIMO
scanning of the 1x1 frequency.
Maximum data transfer rate
Radio 1
up to 574 Mbps
Radio 2
up to 1200 Mbps
Radio 3
frequency scan only
Bluetooth with low power consumption
Bluetooth scanning and iBeacon advertising at a maximum transmission power of 10 dBm
Interfaces
7 10/100/1000 Base-T RJ45 ports (1x 802.3 at PoE (PD), 1x 802.3 af PoE (PSE), 2x Non-PoE ports, 1x End-to-end input, 1x end-to-end output, 1x RS-234
Power supply via Ethernet (PoE)
1 x 802.3 at PoE by default
Operating modes
power supply 802.af PoE – radio communication; powered by 802.3 at – all radios+PSE (7W); Powered by DC adapter – all radios + USB + PSE (802.3 af)
Simultaneous SSIDs
Up to 16 (14 if background scanning is enabled)
EAP Type(s)
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
User/Device authentication
WPA™, WPA2™ and WPA3™ with 802.1 x or previous key, WEP, Web Captive Portal, MAC blacklist and Permissions list
Maximum Tx power (produced)
of 1 2.4GHz Radio
23 dBm/200 MW (2 circuits together)
Radio 2
5 GHz 22 dBm/158 MW (2 circuits together)
Radio 3
no data available
Kensington Castle
yes
IEEE standards
802.11 a, 802.11 b, 802.11 e, 802.11 g, 802.11 h, 802.11 i, 802.11 j, 802.11 k, 802.11 n, 802.11 r, 8-2. Fi 6), 802.1 Q, 802.1 X, 802.3 ad, 802.3 af, 802.3 at, 802.3 az, 802.3 bz
Supported SSID types
Local bridge, tunnel and grid
Radio client capacity
Up to 512 radio clients (Radio1 and Radio2)
The coexistence of cellular communications
yes
The LED is off
yes
OFDMA
yes
Spatial Reuse (BSS coloring)
yes
UL Mode
MU-MIMO 802.11 yes
DL-MU-MIMO
yes
Improved Target Wake-up time (TWT)
Yes
